Helping our Clients Save Money with Cleaner, Safer Water Treatment

View a short video on how EnduroSolv® can make a difference for you.

Help Your Facility Become Greener

Whether you're looking to become LEEDS Certified or just looking for ways to make your facility more Green, EnduroSolv® can help:

• No Liquids to Spill
• No Drum Disposal Issues
• No Exposure to Hazardous Chemicals
• No offensive Odors or Fumes
• No Powders to Irritate
• Substantially reduced Product Handling Issues
• Safe and Simple to apply
• Environmentally friendly products
• Cleaner, safer work area
• Conserve floor space
• Assists in continuous improvement for ISO 14001

Help Reduce Risk & Liability Concerns

Using EnduroSolv® products can help you REDUCE RISK & LIABILITY ISSUES in many ways:

Reduce Economic Concerns

Economic Benefits of having a well run treatment program include the following:

• No energy absorbing scale deposits - saving you $$
• Extended equipment life through better corrosion control - saving you $$
• No costly microbiological deposits and fouling - saving you $$
• Maximum energy Efficiency, - saving you $$
• Reduced potential for harmful microbiological growths such as Legionella pneumophila, more commonly referred to as Legionnaire Disease.

EnduroSolv® uses state of the art proven chemicals, manufactured into a SOLID concentrate, transported in a low carbon footprint profile, and applied easily at your site with our patented dissolving system. You receive all of the benefits of a well run chemical program, without the hassles of dealing with liquids

• Because EnduroSolv® products are shipped without liquids, freight costs are substantially reduced. The cost of transporting solids is approximately 1-2% of the chemical costs, versus 15-20% of the chemical costs for liquids - saving you $$. (Approximately 15-20% of your chemical budget is used to ship mostly water when using liquids).
• In addition to the substantially higher costs of transportation of liquids, there is also a "hidden cost" for using drums. One study put a time, then a dollar value to this hidden cost, and calculated an additional cost of over $140 for each drum.
• In some cases, cost avoidance can be a major area of savings. Because solids are reconstituted on site, the strength of the solution is substantially below the threshold value where eyewash and showers are required. One university saved over $500,000 by not having to make these installations.
• Using EnduroSolv® products can help you save Energy Dollar$. Scale and deposit control is critical with today's high cost of energy. Two examples are below

Boiler Example
A 200 horsepower boiler, operating at 100 psig, 24 hours per day, 365 days per year, and burning natural gas costing $7.00/1,000 cu. ft. will have a fuel budget of $581,774 for annual operation. An "eggshell" (generally defined as 1/32) deposit, will cost an additional $23,271-$69,813 depending on the content of the deposit. If you are experiencing deposits, you need to talk to an EnduroSolv® dealer today.

Chiller Example
A 500-Ton chiller, operating 12 hours per day, 240 days per year, with an electric cost of $0.08/kilowatt hour will have an energy budget of $86,400 per year. 1/64" of deposit will cost and additional $12,960 - $21,600 per year in wasted energy. Microbio films can easily double the cost of these figures. (In addition, we have not included the cost of demand charges, which are real, but can vary greatly by customer. To fully quantify the wasted energy dollars, your actual costs need to be included in the calculations).

• Using EnduroSolv® products can help you minimize corrosion and extend equipment life, saving you operational and capital dollar$. Reducing "General Etch" corrosion from a generally considered excellent rate of 5 mpy (mills per year; 1 mill per year = 1/1000"), to less than 2.5 mpy will double the life of your equipment. In addition to saving capital dollars, the metal that corrodes will become part of the deposit, and operational costs will reflect the higher costs shown in the examples above.
• EnduroSolv® products can help you save water, sewer, and chemical dollar$ by reusing the water, its maximum number of times. One study concluded that increasing the number of times water can be reused in a cooling tower from 4 to 6 cycles, would have the effect of reducing water make-up demand by over 408,000,000 gallons annually in just the Commercial and Institutional markets. Most EnduroSolv® cooling water scale inhibitors are capable of meeting the needs for these savings. A certified EnduroSolv® dealer can help you quantify the savings potential at your facility.

Reduce Your Carbon Footprint

EnduroSolv® can help you Reduce the Carbon Footprint of your Facility

• Liquids, in addition to being bulky, are very heavy and consume a great deal of energy to transport.
• Most liquid products require a pH adjustment to remain in solution. These adjustments generally are made by adding caustic to the mixture. Caustic (NaOH) is a hazardous, corrosive chemical. In cooling tower applications alone, within the Commercial and Institutional marketplace, over 38,000,000 pounds of caustic is added to liquids to accomplish this. EnduroSolv® products do not require the addition of caustic, and shipment of this hazardous chemical is eliminated. The effect of this elimination would be the equivalent carbon footprint of removing 52,000 automobiles each year from our roadways.

• A 55 Gallon drum, weighing 500 pounds, will consume 2.5 more gallons of diesel fuel per typical shipment than a 50 pound carton of EnduroSolv® having the same amount of active ingredients.
• Liquids require multiple shipments from cradle to grave. The raw materials must be transported in to the manufacturing facility. Once blending has been completed, the products must be packaged and delivered to the customer. Once the customer has consumed the product, and triple rinsed the drum, it must be stored and eventually transported again to either the manufacturer or drum recycler. While EnduroSolv® can't eliminate all of these steps, we use a blend of liquid and solid raw materials, ship dry products weighing 40-50 pounds (compared to the 500 pounds they replace in a liquid drum), and are consumed 100% on premise with the container being a plastic jar that is recyclable.
• In addition to a significant reduction in Carbon Footprint for each case of EnduroSolv® product shipped, there is a significant economic consideration to these freight costs. Typically, due to the weight of the liquids shipped, and the bulk size, freight costs can be 15%-20% of the total costs you are paying for chemicals. With EnduroSolv® products, you only pay shipment of the active ingredients - typically 1-2% of the product costs. Why pay for water being transported?